...
Power on your PRO Hub using the power switch on the front panel
Connect the same USB-B cable used in STEP 1 above from your computer to the PRO Hub’s main card
Navigate to the HB_PRO external drive in your file system. This drive should present itself immediately when you connect the Hub to your computer.
Replace the ofile.rbf in the HB_PRO drive with this file:
View file name ofile.rbf Copy the CONFIG.TXT file from the HB_PRO drive into your computer’s file system
Disconnect the USB Cable from your PRO Hub. This should cause your Hub to automatically reboot and apply the new version.
Follow the Quick Start Guide here: Check PRO Connect https://heartech.atlassian.net/wiki/x/BIDSeQ to connect your PRO Hub to the PRO Connect application.
Check to ensure your Hub has compatible firmware with PRO Connect.been updated to PRO Connect compatible firmware. The Hub’s selector in the device list will not have a red information icon and the firmware version will be greater than v8.0.
...
STEP 3: UPDATE YOUR HUB’S CONFIGURATION
Navigate to the PRO Hub configuration page for your hub in PRO Connect
Open the File Tab at the top of the page and click the IMPORT button.
Add the file CONFIG.TXT file from the HB_PRO drive saved in STEP 2: 5. above.
Click the Apply Config button.
CONGRATULATIONS YOUR INITIAL PRO HUB UPDATE IS COMPLETE!
If you have any issues during this upgrade process please contact support at