Hear Back PRO

FIRMWARE UPDATES:

Refer to Hear Back PRO User Guide on how to check your current Hub and Mixer firmware version

PRO Hub:


V6 Firmware: (right click and "save link as" to download)
Hear Back Pro Hub V6.5.zip

(Released December 9, 2020) – New firmware allowing input channel naming and use of the new Hear Back PRO Mixer Digital Overlay electronic scribble strip.

Note: we had released a version 6.8 but due to a bug where the clock would sometimes switch to external when using the iOS app. We rolled back to this version. The only issue with this version is the audio is 6dB hotter on each channel. 

Hear Back Pro Hub V6.6.zip (ONLY WORKS WITH 32 CHANNEL DANTE & MADI CARDS)(Released December 9, 2020) – This is the same as V6.5 but setup to work with 32 channel Dante and MADI cards.

Note: we had released a version 6.8 but due to a bug where the clock would sometimes switch to external when using the iOS app. We rolled back to this version. The only issue with this version is the audio is 6dB hotter on each channel. 
Hear Back PRO Hub Bootloader Update V2.8.zip(Released August 13, 2021) – New firmware allowing input channel naming and use of the new Hear Back PRO Mixer Digital Overlay electronic scribble strip. Improvements for Mac OSX mass storage. Removes the ability to remotely change the clock source to external. Erroneous data was reported to cause the clock to change to external, rendering the whole system useless until it was discovered that the clock source was changed. Now the only way to change the clock to external is to edit the
CONFIG.TXT file on the hub.
V2 Firmware: (right click and "save link as" to download)

Hear Back PRO Hub Firmware Version 2.10

 (Released January 2, 2019) – Improves iOS app communication with Mixers. Required for the "Hear Back PRO" iOS app (available for download on App Store). Compatible with any operating system that supports USB memory sticks.

Hear Back PRO Hub Bootloader Update Version 2.2

 (Updated February 13, 2018) - Added support for future Word-Clock card

PRO Mixer:

Mixers with bootloader versions below v2.24 must be updated from a Firmware Update Card, which can be purchased directly from Hear Technologies. Contact Technical Support for more info.

  • Upgrading/downgrading with Desktop Firmware Updater:

PRO Dante Card: