IMPORTANT: This guide should only be run if you have first attempted to use the PRO Connect PRO Hub FPGA Only update utility and were unsuccessful.
IMPORTANT: This guide should only be run if you have first updated your PRO Hub’s bootloader to v2.24.
STEP 1: Turn off your Hub’s power switch and disconnect all USB cables from your Hub.
...
STEP 11: Wait for your Hub to show up in the PRO Connect Device list.
...
STEP 12: Navigate to the File Tab on the Hub’s Config page.
...
STEP 13: Import the CONFIG.TXT file from your computer’s Desktop and Apply that configuration.
...