WSG Bridge

Owned by Donnie Pitts
Last updated: Jul 08, 2024 by Nason Tackett
1 min read

GUIDES:

3D MODELS:

WSG Bridge Blender 3D.blend (COLOR)

WSG Bridge OBJ.obj (material file for OBJ: WSG Bridge OBJ.mtl) (COLOR)

WSG Bridge STL.stl (MONOCHROME)

WSG Bridge PLY.ply (MONOCHROME)



FIRMWARE UPDATES:

  • Bridge Main Board Firmware Update V4.6 to support new WSG and Dante IP Core cards (Required to run the new WSG Card firmware v1.17.46 or later) (Updated May 4, 2024) WSG Bridge Firmware v4.6.zip
  • For the Dante Card: If your card has a gold sticker next to the Ethernet jacks, it is the new IP Core version of the card and you will need to use the IP Core update below otherwise you will use the Brooklyn II version firmware update below.
  • Dante Card - Brooklyn II Version - Firmware Update (WSG Bridge only) Version 1.0.0.9 (Updated April 8, 2024) - New user partition (v2.3) with new Hear Tech code running with the latest Dante BBE framework v4.4.0.8. Updates for IPV6 addresses.  New features added: Automatically changes the Dante sampling rate to match the current sampling rate of the bridge when card is in slave mode. Automatically changes the sampling rate to match the grandmaster clock's sampling rate. This video shows how to use Dante Controller Software to update the card. The video talks about updating the Hear Back PRO hub but the process is the same for the Bridge as well: 
  • Dante Card - IP Core Version - Update v0.0.0.2 - Fixes static IP addressing not working