Hear Back PRO

Owned by Donnie Pitts
Last updated: Jun 13, 2024
2 min read

GUIDES:

Base System:

I/O Cards:

Accessories:


3D MODELS:

Mixer with Digital Overlay 3D Models:

Hear Back PRO Mixer with OLED Overlay Blender 3D.blend (COLOR)

Hear Back PRO Mixer with OLED Overlay OBJ.obj (material file for OBJ: Hear Back PRO Mixer with OLED Overlay OBJ.mtl) (COLOR)

Hear Back PRO Mixer with Digital Overlay FBX.fbx (COLOR)

Hear Back PRO Mixer with OLED Overlay STL.stl (MONOCHROME)

Hear Back PRO Mixer with Digital Overlay PLY.ply (MONOCHROME)

Hear Back PRO Mixer with Digital Overlay X3D.x3d (COLOR)

Hear Back PRO Mixer with OLED Overlay VRML.wrl (COLOR)

Mixer 3D Models:

Hear Back PRO Mixer Blender 3D.blend (COLOR)

Hear Back PRO Mixer OBJ.obj (material file for OBJ: Hear Back PRO Mixer OBJ.mtl) (COLOR)

Hear Back PRO Mixer FBX.fbx (COLOR)

Hear Back PRO Mixer STL.stl (MONOCHROME)

Hear Back PRO Mixer PLY.ply (MONOCHROME)

Hear Back PRO Mixer X3D.x3d (COLOR)

Hear Back PRO Mixer VRML.wrl (COLOR)

Hub 3D Models:

Hear Back Pro Hub Blender 3D.blend (COLOR)

Hear Back Pro Hub OBJ.obj (material file for OBJ: Hear Back Pro Hub OBJ.mtl) (COLOR)

Hear Back Pro Hub FBX.fbx (COLOR)

Hear Back Pro Hub STL.stl (MONOCHROME)

Hear Back Pro Hub PLY.ply (MONOCHROME)

Hear Back Pro Hub X3D.x3d (COLOR)

Hear Back PRO Hub VRML.wrl (COLOR)

FIRMWARE UPDATES:

Refer to Hear Back PRO User Guide on how to check your current Hub and Mixer firmware version

PRO Hub, PRO Mixers, & Pro Digital Overlays:

PRO Mixers with bootloader versions below v2.24 must be updated from a Firmware Update Card, which can be purchased directly from Hear Technologies. Contact Technical Support for more info.


PRO Dante Card:

  • 16 Channel PRO Dante Card v1.0.0.10 (released 4/8/2024)- New v2.3 user partition with new Hear Tech code running with the latest Dante BBE framework v4.4.0.8. New features added: Automatically changes the Dante sampling rate to match the current sampling rate of the hub when card is in slave mode. New IPV6 address support so that it automatically changes the sampling rate to match the grandmaster clock's sampling rate if IPV6 addresses are used. 
  • 32 Channel PRO Dante Card v1.32.0.11 (released 4/8/2024) - New product ID for 32 channel to set it apart from the 16 channel version (allows it to now work with the automatic Dante firmware update built into Dante Controller). You must manually load this firmware the first time before it will automatically update to future versions via the web. See video below for instructions on how to manually load this firmware:
  • New IP Core Dante Module OS Update v0.0.0.2 - Fixes static IP addressing not working